C-Rails for mounting bolt-clamps and EMC-clamps

•  Dimensions: 30 x 15 mm, slot width 16 mm, same leg length, 90°
•  Slotted hole 6,3 x 18 mm or unperforated
•  Material: galvanised steel, 1,5 mm material thickness
•  Length: 2 m
•  Packaging unit: 20 m, pallet = 1.080 m
•  Also available without holes or with other slotted holes and material thicknesses

more

Labelling heat-shrink sleeves

Shrink ratio: 2:1 or 3:1
Diameter before shrinkage: 2.4 up to 50.8 mm, lengths: 12.5 mm up to 50 mm
Roll sizes: 100 to 5.000 markers/roll, equivalent to other manufacturers available!
Material: Flexible cross-linked polyolefin, can be labelled with standard thermal transfer printers
Colours: White, yellow (light yellow, blue, green, purple, red, orange)
Properties: Halogen-free, low smoke, self-extinguishing, flame-retardant, oil-resistant
Applications: Industry, railway technology according to EN45545, aviation
Standards: EN, DIN, UL, CSA, ASTM, AMS, NSA (Airbus), BS (Boeing), IEC, MIL, NF, SAE, UNI CEI, VW-1 and many more
more

Knockout-punches for rectangular-connectors

•  For heavy-duty connectors and rectangular cable entries and also for split cable entries for prefabricated cables
•  For use with hydraulic tools and battery-powered punching tools
•  With centre punches integrated into the die for marking the fastening holes
•  For sheet steel up to 2.0 or 2.5 mm thick (depending on hole size)
•  For stainless steel sheets on request
•  Punches for pre-drilling the guide holes available

more